Topping Up Tesla Windshield Washer Fluid Model 3

The Tesla washer fluid reservoir, which is located beneath the front trunk, is the only reservoir into which you can put fluid. A notice appears on the touchscreen when the level is low.

These steps will explain how to top up the Tesla wiper fluid:

• Release the hood.
• The area around the filler cap must be cleaned before opening to prevent any dirt getting inside the reservoir.
• Open the cap.
• Fill the reservoir without spilling until you can see the fluid level just below the filler neck.
  
• Immediately clean any spills immediately and wash the area with water.
• Replace the filler cap.

Note: The usage of Volatile Organic Compounds is restricted by some national and municipal rules (VOCs). VOCs are often utilised in washer fluid as an antifreeze. Only use a low-VOC washer fluid if it delivers appropriate freeze resistance in all climates where you drive a Model 3.

Caution: Do not use any formulated washer fluids containing water repellent or bug wash as it may result in streaking, smearing and squeaking or other noises.

Warning: Use a washer fluid with antifreeze in temperatures below 40° F (4° C). In cold weather, if the washer fluid does not have antifreeze it will diminish visibility through the windshield.

Warning: Tesla Model 3 windshield washer fluid can cause skin and eye irritation so it is important to follow instructions provided by the washer fluid manufacturer.

Disclaimer:
Tesla, Inc. was not involved in the development of this document and did not provide any input or otherwise edit, review or authorize it.