Removing and Installing Lug Nut Covers Tesla Model 3

If your Model 3 is equipped with lug nut covers, you will need to go through the Tesla lug nut cover removal process.

To remove a lug nut cover:

• Put in the curved part of the lug nut cover tool (in the glovebox) into the hole at the base of the Tesla 'T.'
  
• Move the lug nut cover tool until it is completely inserted into the lug nut cover hole.
• Turn the lug nut cover tool so the curved part is touching the center of the lug nut cover.
• Be firm and pull the lug nut tool from the wheel so the lug nut cover is released.
  

To attach the lug nut cover:

• Put the lug nut cover into an aligned position.
• Firmly push down on the lug nut cover so it properly snaps into place.

Disclaimer:
Tesla, Inc. was not involved in the development of this document and did not provide any input or otherwise edit, review or authorize it.