Removing and Installing Aero Covers Tesla Model 3

If your vehicle has aero covers, you must go through the Tesla lug nut cover removal process to access the lug nuts.

Model 3 Remove Aero Covers:

  • Firmly hold the aero cover using both hands.
  • Pull the aero cover out towards you to detach the retaining clips.

Model 3 Install Aero Cover:

  • Put the aero cover in position so the base of the Tesla 'T' is in line with the tire valve stem.
  • Push down firmly around the edge of the aero cover until it snaps properly into place.
 

Removing and Installing Lug Nut Covers

If your Model 3 has lug nut covers, they must be removed to get access to the lug nuts.

Tesla Lug Nut Cover Removal:

  • In the hole at the base of the Tesla 'T,' insert the curved section of the lug nut cover tool (found in your glovebox).
  • Manipulate the lug nut cover tool until it is fully inserted into the lug nut cover's hole.
  • Twist the lug nut cover tool until the curved section touches the lug nut cover's centre.
  • Remove the lug nut tool from the wheel and drag it away from the wheel until the lug nut cover is off.

Tesla Lug Nut Cover Install:

  • Put the lug nut cover in place.
  • Firmly push firmly down on the lug nut cover until it snaps properly into place.

Disclaimer:
Tesla, Inc. was not involved in the development of this document and did not provide any input or otherwise edit, review or authorize it.